2 Ton Come-Along
JET 2-Ton Capacity 20’ Heavy-Duty Lines Man Cable Puller. Heavy-Duty Cable Puller designed to lift, lower, stretch, or pull heavy loads. Drop-forged hooks with safety latches standard. Complies with ANSI/ASME B30.21 standards.
Engine Hoist Knockdown
Kaydee Knockdown Lifts can be quickly taken apart, moved, and assembled. They go wherever the job is from the backyard, shop, warehouse, office tower, or construction site. Kaydee Lifts use a swivel slip hook at the end of the boom. A short column post converts any standard Kaydee Lift to a van lift. Then engine sling features an adjustable, plated proof coil chain with a capacity of 1,250 lbs. The engine grabber bolts to intake manifold V-6 and V-8 engines with a capacity of 1,200 lbs. $30.00 Deposit Required
This Hi-lift Jack has a lifting noose that’s 4-1/2”. The 42” model has 32” continuous lift; 48” model lifts 38”; 60” model lifts 50”, all tested to 7,000 lbs. Cast steel for strength, rigidity, and durability. Shear pin arrangement prevents dangerous overloading. Safe, positive contact lifting movement. Lifting unit automatically drops away from work the moment weight is off.
Hoists Hand and Chain
This heavy-duty hand chain hoist features impact-resistant, lightweight steel construction with a durable powder-coat finish. The drop-forged anchor plate prevents travel at the hook’s lowest position and triple-spur gears provide a high-efficiency ratio. It’s compact and portable with excellent load spotting capabilities and has low headroom for easy installation. It’s also heat-treated, grade 80 low chain where and is designed for smoother operation and prevents side pull jamming. The west-type automatic brake system is completely enclosed and provides positive load control, while the wide-throat safety hooks feature heavy-duty latches and swivel 360 degrees for easy rigging. Complies with OSHA, ANSI/ASME B30.16 and HST-2M standards.
Impact Wrench Electric 1/2" Dewalt
Great for those places where this is no air available. Changes tires, bleak, loose, hard, rusted bolts without dragging that compressor out.
Jack Bottle 20 Ton
This JHJ Series Heavy-Duty Industrial Bottle Jack can be used for lifting, pushing, spreading, bending, pressing or straightening requirements and is not affected by temperature extremes. We have low profile truck models or standard models. The electrically welded base and cylinders to assure strength and eliminates leaks and common release valve assemblies and other interchangeable parts for quick repair are standard. All models work in upright, angle or horizontal position and the pump handle included with all models. This complies with ANSI/ASME B30.1 and PALD-1 standards.
Jack Hydraulic 12 1/2 Ton Bottle
Jet, 12-1/2 ton capacity, industrial hydraulic bottle jack. The jet model #jhj-12-1/2, minimum height 9-1/2”, maximum height 18-1/2”, piston height 5-7/8”. Jack can be used for lifting, pushing, spreading, bending, pressing or straightening, not affected by temperature extremes, works in upright, angle or horizontal position. This has an electrically welded base and cylinders, and the pump handle is included.
Puller Pitman Arm
Designed for most domestic cars and light trucks. Pressure screw size: 3/4"-16 x 6 7/8". Industrial finish.
Transmission Jack Car/Truck
Transmission jack has smooth hydraulic lifting and lowering. Saddle allows full side to side and front and back adjustment.
Transmission Jack Large Truck
A full 2,200 lbs. handling capacity with a profile only 8-1/4 in. off the ground! That makes it perfect for getting under the newest style of low profile, aerodynamic trucks with wind-cheating fairings. The 5019 can be raised to a full 36-1/2 inches off the ground! The swiveling pump handle can be positioned for use even in those restricted working spaces.
Transmission Jack Small Scissors
Perfect for removing transmissions on smaller vehicles. Heavy duty steel construction with ball bearing easy-roll casters. Includes 2'' W x 43'' L nylon strap to secure the load. Works with any 1/2'' drive ratchet handle (not included).