Welcome to our website. Our inventory is always being updated.

If you do not see what you are looking for, please contact us



Toro dingo 525w Diesel. Done Right.
Our new diesel models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. And because they're part of the full-line family, these diesels are compatible with all of Toro's compact utility loader attachments.

* 25 HP Kubota® engine
* Wide Track Design
* Versatility
* Low Ground Pressure

- 4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

- Hydraulic Power
The TX 525 models' auxiliary hydraulic performance makes the most challenging ground conditions irrelevant by pumping 24 hp to the attachment. Four independent hydraulic pumps deliver:
16.9 gpm of flow to each track
13.8 gpm to the auxiliary
6 gpm to the loader arm

- Simple Controls
You're up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.
- Liquid-Cooled Diesel Engine
The 25 hp Kubota® diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.

- Compact Size
Narrow enough so you can bring hydraulic power easily into 42" access points; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.

- Exclusive Track Drive
Kevlar reinforced tracks, designed specifically for the Toro Dingo TX to offer excellent traction and floatation even in the most difficult conditions. This means you can power through the toughest jobs and still be light on the turf.

TX525 Specifications 
Engine 25 HP Engine Kubota®
Cooling System Liquid Cooled
Hydraulic System Pressure: 3000 psi relief
Auxiliary Flow 13.8 gpm
Loader Arm Flow 6 gpm
Traction Flow 16.9 gpm
Reservoir Capacity 10.5 gallons
Track Endless Kevlar reinforced rubber
Controls Key, throttle, choke
Steering Single control w/ ref. bar
Loader/ Hydraulic System Joystick control for all functions
Dimensions: Ground Clearance 4.6"
Overall Length 70.7
Overall Width 41"
Overall Height 46.1"
Hinge Pin Height 65.8"
Ground Speed 0-4.5 mph fwd, 0-2 mph reverse
Tip Capacity (max lift) 1,580 lbs
SAE Rated Operating Capacity @ 35% tip 553 lbs.
Weight 2001 lbs.
Ground Pressure 3.4 psi
Warranty Engine Warranty* Two Year
Product Warranty* One Year